Before you can provision a Yealink handset with bOnline, the device must be added to your account and a setup string must be generated. This article explains how to do that in MybOnline.
Please note: If the handset was purchased from bOnline, it should already be added to your account automatically.
Add a device to your account
Log in to the MybOnline portal.
Go to Phone Settings > Users and Devices.
Navigate to the Devices section.
Select Add a new device.
Enter the Make, Model, and MAC address of the handset.
How to locate the MAC address:
Check the device label, which is often located on the base station, the bottom of the handset, or the retail packaging.
Access the device menu by navigating to the phone’s Settings menu and selecting the Status or Device Information section.
Select Save.
Get your setup string
In the Devices section, find the handset you added.
Select the three-dot menu on the right of the device.
Select Setup.
Copy the setup string shown in the popup.
You now have everything you need to provision the handset. Follow the steps in Yealink provisioning guide for VoIP 3.0 to complete the setup using the web interface.





