Skip to main content

How to set up your TP-Link EX230 Wi-Fi router

Connect the TP-Link EX230 Wi-Fi router for FTTP full fibre. bOnline routers are plug and play, with login, factory reset and third-party router details.

The TP-Link EX230 is a Wi-Fi router for FTTP (full fibre) only. It does not have a built-in modem, so it connects to the internet with an Ethernet cable from your fibre box (ONT). If you have ADSL, FTTC or SoGEA, see How to set up your TP-Link VX230 modem router.

Plug and play: routers supplied by bOnline are pre-configured. Connect the cables, switch the router on and it sets up automatically. You do not need to change any settings.

What you need

  • A TP-Link EX230 router

  • An active fibre connection, with a fibre box (ONT) installed at your premises

  • A central, open spot for the router, for the best Wi-Fi coverage

Connect your router

  1. Connect an Ethernet cable from your fibre box (ONT) to the WAN port on the router.

  2. Connect the power adapter and switch the router on.

  3. To connect a computer with a cable, use any of the orange LAN ports.

Check the lights

  • Power (solid): the router is on and ready.

  • WAN (on): the router is connected to your fibre box. If it is off, check the Ethernet cable between the fibre box and the router.

  • Internet (on): you are connected to the internet. If it is off, there is no internet connection.

  • 2.4G and 5G (on): Wi-Fi is switched on.

Log in to your router settings

You only need to log in if you want to change router settings. Connect to the router's Wi-Fi network, or to a LAN port with an Ethernet cable. Then open a browser and go to http://tplinkwifi.net or 192.168.1.1.

  • There is no username field. Enter the admin password only.

  • The default admin password is superB0n1ine. Depending on when your router was sent out, it may instead be superB0nline. If one does not work, try the other.

Please note: the admin password is different to your Wi-Fi password. The Wi-Fi password is on the sticker underneath the router and is used to connect your devices.

Manage your router with the Aginet app (optional)

  1. Download the TP-Link Aginet app from the Apple App Store or Google Play.

  2. Connect your phone to the router's Wi-Fi network. The network name (SSID) and password are on the sticker underneath the router.

  3. Open the app and follow the on-screen instructions to view or change your router settings, such as your Wi-Fi name and password.

Using your own (third-party) router

Routers that were not supplied by bOnline are not pre-configured. Contact bOnline to get your PPPoE username and password, then enter them in your router's internet connection settings.

How to factory reset your TP-Link EX230

If you cannot log in to your router settings, or need to restore the default configuration, you can factory reset the router.

Please note: a factory reset erases all custom settings, including your Wi-Fi network name and password. Your broadband connection reconfigures automatically once the router restarts.

  1. Make sure the router is powered on.

  2. Find the Reset button on the back of the router. It is a small pinhole.

  3. Use a paperclip or pin to press and hold the Reset button for 10 to 15 seconds.

  4. Release the button when the lights start flashing.

  5. Wait a few minutes for the router to restart. To log in to the router settings afterwards, use the admin password in the Log in to your router settings section above.

Did this answer your question?