Step 1: Access and Login
Connect your computer to the same network as the ATA. To find the device's IP address, dial ***02 on a connected analogue phone, then enter the IP address into your web browser.
Log in using the default credentials (usually admin/admin).
Step 2: Checking Initial Status
Navigate to Status > Port Status. At this stage, the device will show as "Not Registered."
Step 3: Automated Provisioning
Go to Maintenance > Upgrade and Provisioning>Config file.
Set the "Config Server Path" to the bOnline instance to automatically pull settings.
Step 4: Manual Port Activation
If you're not using automated provisioning, you'll need to activate the account manually. Go to FXS Port > General Settings and:
Tick Account Active
Enter the Primary SIP Server provided by bOnline
Step 5: Firmware Check
Go to Maintenance > Upgrade to make sure your firmware is up to date. This helps ensure stability on modern networks.
Step 6: Final Registration Verification
After saving your changes, the device may reboot. Once it's back online, return to Status > Port Status. The Registration column should now show "Registered" in green, with your User ID visible.
