This article explains how to log in to your Archer VR1210v router settings. You may need to do this to check or change how your router is set up. Your router admin login is different from your Wi-Fi password, which is the one you use to connect your devices and is usually printed on the sticker on the router.
How to log in to your router settings
- Connect your device to the router, either over Wi-Fi or with an Ethernet cable. You cannot reach the settings page unless you are connected to the router.
- Open your browser and enter http://tplinkwifi.net in the address bar, then press Enter. If that does not load, try 192.168.1.1.
- Enter the default admin password: superB0n1ine. This is case sensitive, so enter it exactly as shown with a capital B.
- Select Login.
Please note: If you have changed this password before and cannot remember it, or the default does not work, ask to speak to a human agent and we will help you with this.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article